The 13L Electronic Timer Autoclave is a compact, stylish, and easy-to-operate top-loading sterilizer designed for clinics, laboratories, hospitals, and diagnostic centers. Constructed with all-aluminium deep-drawn seamless technology, it ensures long-lasting durability, excellent heat distribution, and maximum safety. Equipped with an advanced Electronic Timer & Buzzer, dual-stage over-pressure protection, and a calibrated bleeding pressure stopcock, this autoclave delivers consistent and reliable sterilization performance. Its color-coded pressure gauge, efficient copper heating element, and ISI-marked heat-resistant gasket make it a dependable choice for daily sterilization needs. Each autoclave undergoes strict quality testing to ensure complete user safety and effective sterilization.
13 Litres Electronic Timer Autoclave
Category: CSSD Sterillization
In Stock (10 available)
Description
-
All-Aluminium Seamless Deep-Drawn Construction
Ensures excellent strength, resistance to corrosion, faster heating, and enhanced longevity. -
Compact, Stylish & Lightweight Design
Easy to use, store, and transport with multiple color options to suit modern medical spaces. -
Dual-Stage Over-Pressure Protection System
Includes a calibrated bleeding pressure stopcock and pressure release valve to ensure safe operation at all times. -
ISI-Marked Extended-Life Gasket
Heat-resistant, durable gasket ensures airtight sealing and longer service life. -
60-Minute Electronic Timer with Buzzer
Provides accurate and consistent sterilization cycles for reliable results.
| Body Material | Seamless all-aluminium deep-drawn chamber |
| Heating Element | 100% heavy-duty copper |
| Timer | 60-minute electronic timer with buzzer |
| Pressure Safety | Dual-stage over-pressure protection (stopcock + pressure release valve) |
| Gasket | ISI-marked heat-resistant gasket |
| Pressure Gauge | Color-coded, easy-read display |
| Handles | Heat-resistant, ergonomic |
| Available Colors | Multiple color options |
| Construction | Lightweight, compact, corrosion-resistant |
| Testing | Factory-tested for performance & safety |
-
Long-lasting construction due to seamless aluminium build
-
Uniform heating for effective sterilization cycles
-
Enhanced safety with dual pressure protection
-
Low power consumption with copper heating element
-
Easy to operate with electronic timer
-
Reduced maintenance due to high-quality gasket
-
Compact design suitable for small clinics & labs
-
High reliability—each unit is quality-tested
- Prepare the Autoclave Place the autoclave on a stable, flat, heat-resistant surface. Ensure the inner drum and tripod are properly positioned. Check the gasket and lid sealing area for cleanliness.
- Add Water Pour the recommended amount of clean water into the chamber (usually 1–1.5 liters or as marked). Ensure water does not exceed the maximum level.
- Load the Instruments Place instruments inside the SS drum—make sure they are cleaned and dried. Do not overload; steam must circulate freely. Keep instruments slightly separated for proper sterilization.
- Close the Lid Align the lid properly and tighten the handles evenly in a diagonal sequence. Ensure the gasket is seated correctly for a proper seal.
- Set the Timer Connect the autoclave to a 110/220V power supply. Set the Electronic Timer (0–60 minutes) based on sterilization requirements. Typical cycle: 25–40 minutes depending on load.
Write a Review
Customer Reviews (2)
All-Aluminium Seamless Deep-Drawn Construction Ensures excellent strength, resistance to corrosion, faster heating, and enhanced longevity.
All-Aluminium Seamless Deep-Drawn Construction Ensures excellent strength, resistance to corrosion, faster heating, and enhanced longevity.